Home > Products

Products

  • Select
  • to
  • fiber laser cutting controller cypcut

    fiber laser cutting controller cypcut fiber laser cutting controller cypcut BCS100 standalone capacitor booster Universal Pulse Laser Cutting Motion Control Card BMC1604Support flat and tube cutting, providing a wide range of fiber laser cutting solutions.BCS100 stand-alone capacitor booster uses a speed position double closed-loop algorithm to control the laser cutting capacitor with the head, running speed and accuracy are significantly better than similar products at home and abroad. Unique network communication interface, can achieve a high degree of automatic tracking, sub-perforation, progressive perforation, looking edge cutting, frog jump up,
    Detail
    Send Inquiry
  • fiber laser cutting head raytools BT240

    fiber laser cutting head raytools BT240 Cutting head Power rating: up to 4KW Focal length options (monolithic, quartz material, wavelength 1025 ~ 1080nm): 100mm, 125mm, 150mm, 200mm (2D) Through aperture: 25mm Nozzle hole diameter: 1.0mm ~ 3mm Nozzle hole specifications: single, double, porous and non-standard Auxiliary gas pressure: up to 30 bar Weight: ~ 2.5kg Collimator Focal length (double piece, quartz glass, wavelength 1025 ~ 1080nm): 60mm, 75mm, 100mm, Through aperture: 28mm Fiber interface (other suitable requirements): QBH, LLK-B, QD Height sensor Stroke range (accurate to 1mm): 0.5-10mm Calibration: Automatic calibration / manual calibration Response time:
    Detail
    Send Inquiry
  • raycus fiber laser source

    raycus fiber laser source raycus fiber laser source RFL-C300 500 750 1000 1500 300W 500W 750W 1000W 1500W e third-generation medium-power single-mode continuous fiber laser developed by Raycus ranges from 50W to 1,000W, the new laser has higher electro-optical conversion efficiency (>30%), higher and more stable optical quality, stronger altitude stress-resisting capacity and it applies optimized second-generation fiber transmission system to ensure more stable and more sophisticated cutting effect in thick sheet cutting. This machine applies to many application scenarios: cutting, welding, holing, medical device processing, etc., with a narrow seam of the cut sheet and bright section. Compared with same lasers, it has obvious advantages.
    Detail
    Send Inquiry
  • co2 laser marking machine and parts

    co2 laser marking machine and parts can sell whole machine can sell as parts, glass tube, rf tube ,size and table and power can be choosen
    Detail
    Send Inquiry
  • fiber laser marking machine

    fiber laser marking machine 10w 20w 30w 50w stand type,desktop,portable, handheld,spit, flymarking,rotary, standard.production line.
    Detail
    Send Inquiry
  • fiber marking whole kit parts

    fiber marking whole kit parts fiber marking whole kit parts 110*110mm 20w
    Detail
    Send Inquiry
  • 300W 400W CO2 LASER TUBE 200W CO2 LASER TUBE

    300W 400W CO2 LASER TUBE 200W CO2 LASER TUBE 300W 400W 200W CO2 LASER TUBE,1 year warranty,delivery: within 10 work days ,6MM dia output beam spot. power supply included.
    Detail
    Send Inquiry
  • JINAN MINGYU ZHENYU  CO2 LASER POWER SUPPLY

    JINAN MINGYU ZHENYU CO2 LASER POWER SUPPLY JINAN MINGYU ZHENYU CO2 LASER POWER SUPPLY JNMY 40W 60W 80W 100W 130W 150W
    Detail
    Send Inquiry
  • RDC6344G 4AXIS 7INCH TOUCH SCREEN CO2 LASER CONTROLLER

    RDC6344G 4AXIS 7INCH TOUCH SCREEN CO2 LASER CONTR... RDC6344G 4AXIS 7INCH TOUCH SCREEN CO2 LASER CONTROLLER the large capacity file memory, the two-circuit independent adjustable digital/simulation laser power source control connection, the compatible stronger U plate driver, the multi-channel general/special-purpose IO control, the integrated special-purpose time system support hardware encryption algorithm, may choose and so on with the PC machine communication support ethernet communication and the USB communication.
    Detail
    Send Inquiry
  • EFR CO2 LASER POWER SUPPLY 80W 100W 150W

    EFR CO2 LASER POWER SUPPLY 80W 100W 150W EFR CO2 LASER POWER SUPPLY 80W 100W 150W
    Detail
    Send Inquiry
  • non-metal auto focusing cutting system

    non-metal auto focusing cutting system )Digital Input Detection, 24 Bits Accuracy; 2)Analog Output From +10V To -10V, 12 Bits Accuracy; 3)General I/O Output, Photoelectric Isolation, High-power Output To Drive The Relay, 24V Standard; 4)General I/O Output, Photoelectric Isolation, 24V Standard; 5)Special Motor Interface, The Origin Switch Input And The Limit Switch Input, The Highest Pulse Output Frequency is 500 KHZ; 6)2 Channels PWM Output, 24v And 5v Level Can Be Configured,The Highest output Frequency Is 100 KHZ; 7)Quadrature Encoder Input, TTL Level; 8)A Single Data Acquisition Time Less Than 2ms;
    Detail
    Send Inquiry
  • Water hydrogen flame machine

    Water hydrogen flame machine Water hydrogen flame machine acrylic polish precise welding,Gold silver jewelry welding, Enameled wire welding,Metal welding, glass tube seal, bending. H160 H180 H260 105T 205T 305T 405T 605T
    Detail
    Send Inquiry
  • SDZ CO2 LASER TUBE

    SDZ CO2 LASER TUBE SDZ CO2 LASER TUBE 10months warranty 12000 hours work time, small beam spot ,stable output power,small diverage ,good for cutting and engraving
    Detail
    Send Inquiry
  • step motor gears for laser cutting machine

    step motor gears for laser cutting machine step motor gears for laser cutting machine 3m 20tooth 24tooth 38tooth 48tooth 72tooths
    Detail
    Send Inquiry
  • leadshine step motor and drivers

    leadshine step motor and drivers leadshine step motor and drivers 573s15 573s09 3nd583 m542 57hs22
    Detail
    Send Inquiry
  • taiwan hiwin PMI rails and sliders

    taiwan hiwin PMI rails and sliders taiwan hiwin PMI rails and sliders HGH15CAZAC EGH15CAZAC MSB15S MSA15S
    Detail
    Send Inquiry
  • intelligent reci co2 laser power supply

    intelligent reci co2 laser power supply intelligent reci co2 laser power supply P12 P14 P16 P18, CAN show the reason for problem, can connect to yueming machine and common machine
    Detail
    Send Inquiry
  • Auto feeding laser cutting machine 1610 1810

    Auto feeding laser cutting machine 1610 1810 Auto feeding laser cutting machine 1610 1810 ,CAD, CORELDRAW, PHOTOSHOP, USB PORT,DSP CONTROLLER,256 working documents,Automatic feeding and discharging
    Detail
    Send Inquiry
  • double head express laser engraving and cutting machine 1280 1390 1610

    double head express laser engraving and cutting m... double head express laser engraving and cutting machine 1280 1390 1610 ,DSP motion control card,USB PORT,high cutting speed.
    Detail
    Send Inquiry
  • auto feeding laser cutting machine 1626

    auto feeding laser cutting machine 1626 auto feeding laser cutting machine 1626, CAD, CORELDRAW, PHOTOSHOP, software,USB PORT,256 files storage
    Detail
    Send Inquiry
  • Select
  • to