Home > fiber laser cutting machine and parts > fiber laser cutting controller cypcut

fiber laser cutting controller cypcut

  • metal  cutting machine
  • 1390 metal co2 laser cutting machine
  • raycus fiber laser source
  • fiber laser cutting head raytools BT240
  • fiber laser cutting controller cypcut
  • FIBER laser cutting head RAYTOOLS BT230
  • fiber laser cutting head  WSX-GQ-001A
  • fiber laser cutting head tip  0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0
  • fiber laser protection mirror 22.35*4 25.4*4 28*4 30*5 40*2/3 48*2/3 50*2
  • fiber laser cutting Collimator mirror 25.4  28  30
  • fiber laser cutting focus lens 24 25.4 28 30
  • fiber laser cutting ceramic ring
  • fiber laser cutting sensor cable
  • fiber laser cutting controller RDC6333F

Product Abstract:

fiber laser cutting controller cypcut BCS100 standalone capacitor booster Universal Pulse Laser Cutting Motion Control Card BMC1604Support flat and tube cutting, providing a wide range of fiber laser cutting solutions.BCS100 stand-alone capacitor booster uses a speed position double closed-loop algorithm to control the laser cutting capacitor with the head, running speed and accuracy are significantly better than similar products at home and abroad. Unique network communication interface, can achieve a high degree of automatic tracking, sub-perforation, progressive perforation, looking edge cutting, frog jump up,


Product Description

BCS100 standalone capacitor booster
BCS100 stand-alone capacitor booster uses a speed position double closed-loop

algorithm to control the laser cutting capacitor with the head, running speed and

accuracy are significantly better than similar products at home and abroad. Unique

network communication interface, can achieve a high degree of automatic tracking,

sub-perforation, progressive perforation, looking edge cutting, frog jump up,

BCS100 stand-alone capacitor booster (hereinafter referred to as BCS100) uses a

closed-loop control method to control the laser cutting capacitor with the head, is a

high-performance capacitor heightening device. In addition to similar control with

other products, BCS100 also provides a unique Ethernet network communication

interface, with our CypCut laser cutting software can easily achieve a high degree

of automatic tracking, sub-perforation, progressive perforation, edge cutting, frog jump Lift

cut the head height of any set, flying optical path compensation and other functions, the

response speed is also greatly improved. In the servo control because the BCS100 uses

the speed position double closed loop algorithm, the running speed and the precision

performance are obviously superior to the domestic and foreign similar products.

The following are the same as the "

Details
Features:
Ø sampling rate of 1000 times per second.
Ø The fastest follow speed of up to 500 mm / s.
Ø Height follow control range 0-10 mm.
Ø Static detection accuracy of 0.001 mm, dynamic response accuracy of 0.02 mm.
Ø support network communication, U disk online upgrade.
Ø support the oscilloscope function, real-time detection of capacitance and height changes.
Ø support touch board alarm, the lack of alarm plate, effectively prevent the laser head

accidental collision.
Ø support edge detection and automatic edge cutting, support leapfrog lift, sub-perforation

lifting height of any set.
Ø One-touch calibration process, fast and easy to operate.
Ø Can be adapted with any cutting head and nozzle, capacitance parameter adaptive.

Ø signal transmission cable length of 100, the signal does not decline, anti-interference ability.
Ø The upper speed of the follower depends on the upper limit of the servo motor speed

and the lead wire lead. 5 mm screw and 3000 rpm servo, the maximum follow speed of up to 375 mm / s.

Compared with the performance of foreign products as shown in the following table:

Parameter Category / Product Category Germany Products US Products BCS100
Sampling rate 500HZ 200HZ 1000HZ
Fastest follow speed 200mm / s 100mm / s 500mm / s
Dynamic response accuracy 0.05mm 0.1mm 0.05mm
Dynamic measurement accuracy 0.01mm 0.02mm 0.001mm
Calibration method Manual manual automatic
Parameter setting method potentiometer DIP switch LCD / keyboard
Signal processing analog signal analog signal digital signal
Price BCS100 price of 5 times BCS100 price of 2 times please consult our company directly

Universal Pulse Laser Cutting Motion Control Card BMC1604
Support flat and tube cutting, providing a wide range of fiber laser cutting solutions.
Support flat and tube cutting, providing a wide range of fiber laser cutting solutions.

The following are the same as the "
Shipped
move
control
System
Motor control signal 3-axis high-speed pulse output, the maximum frequency of 3MHz
3-axis encoder feedback channel, quadruple frequency up to 8MHz
The origin of each axis, plus or minus limit, servo alarm dedicated input signal
The following are the same as the "
The following are the same as the "
Motion control performance control accuracy of 0.03mm, the actual track accuracy of 0.05mm
Positioning accuracy of 0.001mm, repeat positioning accuracy of 0.003mm
Control cycle 1ms, with filter S-type acceleration and deceleration
Speed ​​forward, turning point intelligent lift speed
Small arc speed limit, local curvature analysis
Corner smoothing
Product Features:
 Compare the output function with the real-time position of the encoder to achieve the flight scan cutting function.
• Using the adaptive trajectory smoothing algorithm, the Bezier curve transition algorithm is used to deal with the

velocity of the adjacent motion vector, which allows the machine to turn around efficiently in the set performance

range, thus avoiding the phenomenon of burning angle in hot working.

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:

    captcha